Cisco Systems OL-15491-01 Uživatelský manuál stáhnout pdf (Strana 163)

A-163

Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide

OL-15491-01

Appendix A CSG2 Command Reference

ip iscsi target-profile

To create an iSCSI profile for an iSCSI target on the CSG2, and enter iSCSI configuration mode, use the

ip iscsi target-profile command in global configuration mode. To remove the iSCSI profile, use the no

form of the command.

ip iscsi target-profile target-profile-name

no ip iscsi target-profile target-profile-name

Syntax Description

Command Default No default behavior or values.

Command Modes Global configuration

Command History

Usage Guidelines You can configure one and only one iSCSI profile on a given CSG2.

The iSCSI profile enables the CSG2 to read/write to a remote iSCSI device (target) on a SAN via an

iSCSI.

Note The CSG2 supports only one type of backup device, either a PSD or an iSCSI device. The PSD and iSCSI

features can coexist, but only one can be enabled at a time.

The characteristics of each content billing service are defined by the following commands:

• ip (iSCSI)

• name (iSCSI)

• port (iSCSI)

Examples The following example configures an iSCSI profile with the name targetA to use to store and retrieve

CDRs when a charging gateway (CG) is not available:

ip iscsi target-profile targetA

name iqn.2002-10.edu.abc.iol.iscsi.draft20-target:1

ip 10.0.0.1

port 3260

target-profile-name Name of the iSCSI profile.

Release Modification

12.4(15)MD This command was introduced.

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 255 256

Žádné komentáře

Cisco Systems OL-15491-01 Uživatelský manuál Strana 163