Cisco Systems NSS2000 Series Rychlý návod stáhnout pdf (Strana 13)

Configuring the Network Storage System (NSS)

Step 1 — Access the NSS when there is no DHCP Server Present on your Network

NSS2000 Getting Started Guide 9

• Step 3 — Use the Quick Setup Wizards to Configure the NSS: When you log

into the Configuration Interface for the first time, the basic configuration

wizard automatically starts. Run through this wizard to set up the NSS's

basic configuration. You can then choose to run the wizards to configure the

NSS to store video from your IP surveillance cameras.

• Step 4 — Save the Current Configuration: After you configure the NSS, save

a copy of the configuration to a location on the NSS and to a USB key.

Step 1 — Access the NSS when there is no DHCP Server

Present on your Network

This step depends on whether there is a DHCP server on the network to which

you are connecting the NSS (this could be the router). The NSS ships with a

default configuration such that its network interfaces are DHCP configured. For

your computer to communicate with the NSS when no DHCP server is present,

you must manually configure the computer’s network settings.

NOTE: The configuration for your computer is

only temporary. After you initially open the

configuration interface, you can configure the

static IP address for the NSS accordingly and

then restore your computer’s network settings

to their previous values. For help setting the IP

configuration on the NSS, refer to the online

help available with the NSS configuration

interface.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

Žádné komentáře

Cisco Systems NSS2000 Series Rychlý návod Strana 13