Cisco Systems ONS 15310-CL Průvodce řešením problémů stáhnout pdf (Strana 100)

1-66

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

Chapter 1 General Troubleshooting

1.10.4 Circuit Creation Error with VT1.5 Circuit

Symptom You might receive an “Error while finishing circuit creation. Unable to provision circuit.

Unable to create connection object at node-name” message when trying to create a VT1.5 circuit in CTC.

Table 1-23 describes the potential causes of the symptom and the solutions.

1.10.5 OC-3 and DCC Limitations

Symptom There are limitations to OC-3 and DCC usage.

Table 1-24 describes the potential cause of the symptom and the solution.

Table 1-23 Circuit Creation Error with VT1.5 Circuit

Possible Problem Solution

You might have run out

of bandwidth on the VT

cross-connect matrix at

the node indicated in the

error message.

The ONS 15310-CL matrix has a maximum capacity of 336 bidirectional

VT1.5 cross-connects. The ONS 15310-MA capacity is 1,064.

Table 1-24 OC-3 and DCC Limitations

Possible Problem Solution

OC-3 and DCC have

limitations for the

system.

For an explanation of OC-3 and DCC limitations, refer to the “DCC

Tunnels” section in the Cisco ONS 15310-CL and Cisco ONS 15310-MA

Procedure Guide.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 333 334

Žádné komentáře

Cisco Systems ONS 15310-CL Průvodce řešením problémů Strana 100