Cisco Systems IEM30004PC Instalační manuál stáhnout pdf (Strana 103)

B-13

Cisco IE 3000 Switch Hardware Installation Guide

OL-13017-01

Appendix B Installation In a Hazardous Environment

Installing or Removing the Compact Flash Memory Card

Figure B-6 Pushing the Module Latches In

Step 6 (Optional) If the first module attached was an Cisco IEM-3000-8TM, you can connect another

Cisco IEM-3000-8TM or Cisco IEM-3000-8FM expansion module. Follow Step 1 to Step 5 to connect

the module.

Installing or Removing the Compact Flash Memory Card

The switches store Cisco IOS software images and switch configurations on a removable flash memory

card. You can replace the switch without reconfiguring it. The switch ships with the compact flash

memory card installed. Verify that the card is in place on the bottom of the switch.

Warning

Do not insert or remove the compact flash card while power is on; an electrical arc can occur. This

could cause an explosion in hazardous location installations. Be sure that power is removed or the

area is nonhazardous before proceeding.

Statement 379

201826

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 169 170

Žádné komentáře

Cisco Systems IEM30004PC Instalační manuál Strana 103