Cisco Systems MGX 8850 Uživatelská příručka stáhnout pdf (Strana 176)

100

101

3-16

Cisco MGX 8850 Routing Switch Command Reference

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Chapter 3 Equipment and Resource Provisioning

addport

Cards on Which This Command Runs

AXSM

Syntax

addport <ifNum> <bay.line> <guaranteedRate> <maxrate> <sctID> <ifType>

[vpi]

Note For all ports, guaranteedRate must be the same as maxrate.

Syntax Description

ifNum A logical port (interface) number. Only one logical port is allowed if the line

operates as a UNI or NNI. For the virtual network to network interface (VNNI),

multiple ports can exist on a line. For AXSM, the range 1–60.

bay.line Identifies the bay (1 or 2) and the number of the line. The line number is from 1

to the highest numbered line on the back card. For the range of line numbers on

specific AXSM models, see Table 3-1.

guaranteedRate Guaranteed rate on a port in cells per second. For all interface types (UNI, NNI,

or VNNI), guaranteedRate must be the same as maxrate. The total guaranteed

rates cannot exceed the highest value in the following ranges:

OC48: 50–5651320 cps

OC12: 50–1412830 cps

OC3: 50–353207 cps

T3: 50–96000 cps for PLCP or 104268 cps for ADM

E3: 50–80000 cps

maxRate Maximum rate on a logical port in cells/second. For all interface types (UNI,

NNI, or VNNI), guaranteedRate must be the same as maxrate. The total

maximum rates cannot exceed the highest value in the following ranges:

OC48: 50–5651320 cps

OC12: 50–1412830 cps

OC3: 50–353207 cps

T3: 50–96000 cps for PLCP or 104268 cps for ADM

E3: 50–80000 cps

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 785 786

Komentáře k této Příručce

Žádné komentáře

Cisco Systems MGX 8850 Uživatelská příručka Strana 176

Komentáře k této Příručce

Související produkty a manuály pro Sítě Cisco Systems MGX 8850