Cisco Systems XR 12410 Instalační manuál Strana 200

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 230
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 199
Chapter 5 Maintaining the Router
Removing and Replacing AC and DC Power Subsystem Components
5-36
Cisco XR 12410 Router Installation Guide
OL-13832-01
Step 10 Reinstall the DC PEM into the chassis (Figure 5-21):
a. Slowly push the power supply into the chassis until it mates with the
backplane connector at the back of the bay.
Caution To prevent damage to the power shelf backplane connector, do not use excessive
force when inserting a power supply into the chassis.
b. Lift the ejector lever into place and tighten the captive screw to securely seat
the power supply to the backplane connector.
Figure 5-21 Installing a DC PEM
Step 11 Power on the circuit breaker.
Step 12 Set the power switch to the on (1) position.
The (green) Pwr OK indicator on the front of the power supply should light. If the
indicator does not light, see the
“Troubleshooting a 2800 W DC PEM Installation”
section on page 5-25.
129276
Zobrazit stránku 199
1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 229 230

Komentáře k této Příručce

Žádné komentáře