Cisco Systems UCS C210 Uživatelský manuál stáhnout pdf (Strana 24)

2-6

Cisco UCS C210 Server Installation and Service Guide

OL-20887-02

Chapter

Figure 2-2 Attaching a Slide-Rail Assembly

Note The mounting pegs that protrude through the rack-post holes are designed to fit round or square #12-24

holes, or #10-32 holes when the mounting peg is compressed (see

Figure 2-3). If your rack has #10-32

rack-post holes, align the mounting pegs with the holes and then compress the spring-loaded pegs to

expose the #10-32 inner peg.

Figure 2-3 Spring-Loaded Mounting Pegs

c. Pull the inner slide rails on each assembly out toward the rack front until they hit the internal stops

and lock in place.

1 Front-left rack post 2 Rear-left rack post

3 Slide-rail assembly 4 Length-adjustment bracket

5 Locking clip (one on each end of assembly) 6 Mounting pegs (two on each end of assembly)

3 5

195968

1 Pegs in standard (uncompressed) position 2 Pegs compressed to expose 10-32 inner peg

330245

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 103 104

Žádné komentáře

Cisco Systems UCS C210 Uživatelský manuál Strana 24