Cisco Systems 10200 Uživatelský manuál Strana 105

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 214
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 104
5-29
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 5 Managing External Resources
Provisioning the GigE Interface
shut
no shut
Step 5 Save the switch configuration.
Step 6 Reboot the Cisco BTS 10200 host using the shutdown -g0 -y -i6 command. We recommend that you
execute the shutdown command using the console port to avoid loss of connectivity during the reboot.
After the reboot, all the targeted Cisco BTS 10200 applications should automatically restart and go into
standby state.
Step 7 Verify interface speed and duplex mode by executing the following command on the host:
dladm show-dev
Example output:
ca102> dladm show-dev
/jointfilesconvert/83355/bge0 link: up speed: 1000 Mbps duplex: full
/jointfilesconvert/83355/bge1 link: up speed: 1000 Mbps duplex: full
/jointfilesconvert/83355/bge2 link: up speed: 1000 Mbps duplex: full
/jointfilesconvert/83355/bge3 link: up speed: 1000 Mbps duplex: full
Step 8 Repeat for the other UNIX hosts in the Cisco BTS 10200 system.
Zobrazit stránku 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 213 214

Komentáře k této Příručce

Žádné komentáře