Cisco Systems WSC2960X48TDL Uživatelský manuál stáhnout pdf (Strana 41)

PurposeCommand or Action

gigabitethernet1/0/3

(Optional) Saves your entries in the configuration file.copy running-config startup-config

Example:

Switch# copy running-config

Step 7

startup-config

Configuring IEEE 802.3x Flow Control

SUMMARY STEPS

configure terminal

interface interface-id

flowcontrol {receive} {on | off | desired}

end

show interfaces interface-id

DETAILED STEPS

PurposeCommand or Action

Enters global configuration modeconfigure terminal

Example:

Switch# configure terminal

Step 1

Specifies the physical interface to be configured, and

enter interface configuration mode.

interface interface-id

Example:

Switch(config)# interface gigabitethernet1/0/1

Step 2

Configures the flow control mode for the port.flowcontrol {receive} {on | off | desired}

Example:

Switch(config-if)# flowcontrol receive on

Step 3

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 29

Configuring Interface Characteristics

Configuring IEEE 802.3x Flow Control

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 107 108

Žádné komentáře

Cisco Systems WSC2960X48TDL Uživatelský manuál Strana 41