Cisco Systems WSC2960X48TDL Uživatelský manuál stáhnout pdf (Strana 68)

you can apply a network-policy profile on the interface. This way the interface has the voice or

voice-signaling VLAN network-policy profile applied on the interface.

•

You cannot configure static secure MAC addresses on an interface that has a network-policy profile.

•

You cannot configure a network-policy profile on a private-VLAN port.

•

For wired location to function, you must first enter the ip device tracking global configuration command.

How to Configure LLDP, LLDP-MED, and Wired Location Service

Enabling LLDP

Beginning in privileged EXEC mode, follow these steps to enable LLDP:

SUMMARY STEPS

configure terminal

lldp run

interface interface-id

lldp transmit

lldp receive

end

show lldp

copy running-config startup-config

DETAILED STEPS

PurposeCommand or Action

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

Enables LLDP globally on the switch.lldp run

Example:

Switch (config)# lldp run

Step 2

Specifies the interface on which you are enabling

LLDP, and enter interface configuration mode.

interface interface-id

Example:

Switch (config)# interface

Step 3

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

56 OL-29034-01

Configuring LLDP, LLDP-MED, and Wired Location Service

How to Configure LLDP, LLDP-MED, and Wired Location Service

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 107 108

Žádné komentáře

Cisco Systems WSC2960X48TDL Uživatelský manuál Strana 68