Cisco Systems WSC2960X48TDL Uživatelský manuál stáhnout pdf (Strana 70)

SUMMARY STEPS

configure terminal

lldp holdtime seconds

lldp reinit delay

lldp timer rate

lldp tlv-select

interface interface-id

lldp med-tlv-select

end

show lldp

10.

copy running-config startup-config

DETAILED STEPS

PurposeCommand or Action

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

(Optional) Specifies the amount of time a receiving device

should hold the information from your device before discarding

it.

lldp holdtime seconds

Example:

Switch(config)# lldp holdtime 120

Step 2

The range is 0 to 65535 seconds; the default is 120 seconds.

(Optional) Specifies the delay time in seconds for LLDP to

initialize on an interface.

lldp reinit delay

Example:

Switch(config)# lldp reinit 2

Step 3

The range is 2 to 5 seconds; the default is 2 seconds.

(Optional) Sets the sending frequency of LLDP updates in

seconds.

lldp timer rate

Example:

Switch(config)# lldp timer 30

Step 4

The range is 5 to 65534 seconds; the default is 30 seconds.

(Optional) Specifies the LLDP TLVs to send or receive.lldp tlv-select

Example:

Switch(config)# tlv-select

Step 5

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

58 OL-29034-01

Configuring LLDP, LLDP-MED, and Wired Location Service

Configuring LLDP Characteristics

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 107 108

Komentáře k této Příručce

Žádné komentáře

Cisco Systems WSC2960X48TDL Uživatelský manuál Strana 70

Komentáře k této Příručce

Související produkty a manuály pro Software Cisco Systems WSC2960X48TDL