Cisco Systems WSC2960X48TDL Uživatelský manuál Strana 42

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 108
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 41
PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Switch(config-if)# end
Step 4
Verifies the interface flow control settings.
show interfaces interface-id
Example:
Switch# show interfaces gigabitethernet1/0/1
Step 5
Configuring SVI Autostate Exclude
SUMMARY STEPS
1.
configure terminal
2.
interface interface-id
3.
switchport autostate exclude
4.
end
5.
show running config interface interface-id
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 1
Specifies a Layer 2 interface (physical port or port channel),
and enter interface configuration mode.
interface interface-id
Example:
Switch(config)# interface gigabitethernet1/0/2
Step 2
Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX
30 OL-29034-01
Configuring Interface Characteristics
Configuring SVI Autostate Exclude
Zobrazit stránku 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 107 108

Komentáře k této Příručce

Žádné komentáře