Cisco Systems WSC2960X48TDL Uživatelský manuál stáhnout pdf (Strana 72)

DescriptionLLDP-MED TLV

LLDP-MED location TLVlocation

LLDP-MED network policy TLVnetwork-policy

LLDP-MED power management TLVpower-management

Beginning in privileged EXEC mode, follow these steps to enable a TLV on an interface:

SUMMARY STEPS

configure terminal

interface interface-id

lldp med-tlv-select

end

copy running-config startup-config

DETAILED STEPS

PurposeCommand or Action

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

Specifies the interface on which you are configuring

an LLDP-MED TLV, and enter interface configuration

mode.

interface interface-id

Example:

Switch(config)# interface

Step 2

gigabitethernet2/0/1

Specifies the TLV to enable.lldp med-tlv-select

Example:

Switch(config-if)# lldp med-tlv-select

Step 3

inventory management

Returns to privileged EXEC mode.end

Example:

Switch(config-if)# end

Step 4

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

60 OL-29034-01

Configuring LLDP, LLDP-MED, and Wired Location Service

Configuring LLDP-MED TLVs

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 107 108

Žádné komentáře

Cisco Systems WSC2960X48TDL Uživatelský manuál Strana 72